Table of Contents
Advertisement
NURSING BEDS
Loosen the safety screws (c) and remove
the transport and storage system (d) from
the bed end.
The second bed end is fixed in a similar
manner to that above to the foot of the
bed.
Undo the securing strap (4) on the head
section and remove all transport
securing devices on the head and foot
sections.
To open the retaining belt, press the side
tabs (5) on the locking device and pull
back the lock.
7.5
Connecting the lift motor, hand set,
mattress support motor and
Accumulator box
When connecting, ensure that:
• the sealing rings (a) on the plug must not
be damaged while being plugged in.
• The ribs (b) on the plug must be aligned
with the guide grooves (c) on the jack
socket.
22
Issued: 25.07.2007
Setting up the nursing bed
Casa
Med Classic FS
Opening the retaining belt
Advertisement
Table of Contents
