Table of Contents
Advertisement
NURSING BEDS
After moving:
Engage all wheel brakes (a).
Danger of crushing!
• Before locking, turn the steering
rollers to point towards the mattress
support under the nursing bed.
Ensure that the brake and unlocking
levers (a+b) are freely accessible.
Remove the mains plug from the safety
strap.
To open the safety device, press the
side tabs (2) on the locking device
and pull back the lock.
Plug the mains plug into the socket
(see information in chapter 9.2).
9.9
Adjusting the slatted frame springiness
The springiness for the individual slats
can be adjusted using the six bars (1)
fixed to the centre of the slatted frame.
This enables the slatted frame to be
adjusted to suit the user's weight within
certain limits.
Pull bar out (+) = increase hardness
Push bar in (-) = decrease hardness
50
Issued: 25.07.2007
Casa
Med Classic FS
Operation
Engabe wheel brakes
Opening the transport
safety device
Adjusting the bars
Advertisement
Table of Contents
