Operating The Brakes; Pushing The Nursing Bed And Patient Transport - Days Casa Med Classic FS Operating Manual

NURSING BEDS
9.7

Operating the brakes

Danger of crushing!
• Before locking, turn the steering
rollers to point towards the mattress
support under the nursing bed.
Ensure that the brake and unlocking
levers (a+b) are freely accessible.
(a) = engage wheel brakes
(b) = disengage wheel brakes
9.8

Pushing the nursing bed and patient transport

NOTE:
• only transport patients in a lying position
• if the patient pole is fitted, ensure low hanging
objects (ceiling lamps) are avoided.
Before moving:
Run the reclining surface into the initial
position.
Lower mattress support head and foot
sections (observe chapter 9.5).
Pull the bed rails up until the fastening
knob engages.
Remove the mains plug from the socket.
Secure the mains cable against being
run over by tying up with the safety strap
(1) at the head of the bedframe.
Risk of short-circuit and fire!
• Always secure the mains cable
against being run over using the
safety strap (1) before moving the
nursing bed.
(b) = disengage wheel brakes.
Move the nursing bed.
Casa Med Classic FS
Operation
Wheel brakes
Raise bed rails, initial
position
Transport safety device
Release wheel brakes
Issued: 25.07.2007
49