NURSING BEDS
Unlock the tension relief by pressing in
the side clamps (7) and remove.
Disconnect the following electrical
component plugs from the control unit:
2 = Hand set
4 = mattress support motor for
foot section adjustment
5 = Cable for lift motor; foot section
6 = Cable for lift motor; head section
7 = Accumulator box
(only nursing beds with
Trendelenburg's position)
Remove the accumulator box from the
nursing bed (only nursing beds with
Trendelenburg's position).
Pull both quick-release bolts (8 + 9) out
of the receptacle and remove mattress
support motor (10).
62
Issued: 25.07.2007
Casa
Med Classic FS
Storage
Disconnect the plugs
Remove accumulator box
Remove mattress
support motor