Table of Contents
Advertisement
NURSING BEDS
6.0 Fittings: Electrics
6.1
Lift motor
The lift motor (1) is mounted directly on the
nursing bed head section or foot section.
The motor lift movement is 40 cm. This
enables the nursing bed lying area to be
raised from 40 cm to 80 cm.
6.2
Hand set
The hand set is used to operate all nursing
bed actuator motors. Operation takes place
using the keypad on the front side of the
hand set.
The fixing bracket on the rear of the hand
set can be used to hold it in an easily
reachable position on the nursing bed.
6.2.1 Hand set locking function
Depending on the version, the hand set is
fitted with an electrical or mechanical
pushbutton locking device.
The locking device secures the nursing bed
against unauthorised use.
The electrical locking device is switched on
and off using the magnetic key supplied.
The mechanical locking device is switched
using the rotary switch on the rear of the
hand set (a).
Casa
Med Classic FS
Fittings: Electrics
Lift motor
Hand set
Magnetic key
Rotary switch
Issued: 25.07.2007
17
Advertisement
Table of Contents
