NURSING BEDS
13.0 Troubleshooting
Fault
Mattress support
head section or foot
section, or bed
frame, cannot be
raised/lowered
Mattress support
foot section does
not locate when
being raised
Castors cannot be
locked
Bed rails jam
Hand set indicator
lamp is never
illuminated when
operated
Model
all models
all models
all models
all models
all models
Casa
Med Classic FS
Troubleshooting
Cause
Mains plug not
plugged in
Hand set locked
Thermoswitch
active
Hand set defective
Control unit
defective
Automatic catch
defective
Castor defective
Locking bar or
castors defective
Fixing dirty or
broken
Adjustment locked
(hand set)
Drive load
exceeded
Controller defective
Remedy
see chapt. 9.2
see chapt. 9.4
try again after
20-30 minutes
Inform your dealer
Inform your dealer
Inform your dealer
Inform your dealer
see chapt. 7.13
see chapt. 9.4
Reduce drive load
Inform your dealer
59
Issued: 25.07.2007