Remote Spring Service - Rlr Only - SRAM RockShox Deluxe RT3 Service Manual

2 0 0 H o u r S e r v i c e
R e m o t e S p r i n g S e r v i c e - R L R o n l y
The remote spring can be serviced on its own without completing air can or damper service.
RLR: Use a vise block with the 10 mm shaft clamp to clamp the shaft
1
into a vise.
NOTI CE
To prevent damage to the seal head/air piston, position the shaft in the
vise so that the piston is clear of the vise jaws.
RLR: While holding the spring preloader in place, remove the
2
preloader lock screw from the eyelet.
Remove the spring preloader, spring bushing, and remote spring from
the eyelet.
⚠ CAUTI ON - EYE HAZARD
The preloader lock screw is spring loaded and can eject rapidly from
the eyelet if the spring preloader is not held in place.
2 mm 3 mm

Remote Spring Service - RLR only

40