Deluxe™ Service; Parts, Tools And Supplies - SRAM RockShox Deluxe RT3 Service Manual

D e l u x e ™ S e r v i c e
Prior to servicing your rear shock, remove it from the bicycle frame according to the bicycle manufacturer's instructions. Once the shock is removed
from the bicycle, remove the mounting hardware before performing any service (see the
P a r t s , T o o l s a n d S u p p l i e s
Parts
• AM SVC kit 50h DLX/SDLX A1
• AM SVC kit 200h/1yr DLX A1
• AM SVC kit 200h/1yr DLX RMT A1
• RMT Spring kit DLX/SDLX/SDLXC
Safety and Protection Supplies
• Safety glasses
• Nitrile gloves
• Apron
• Clean, lint-free rags
Lubricants and Fluids
• Isopropyl alcohol
• RockShox® Dynamic Seal Grease
• Maxima® Maxum4 Extra 15w50
• RockShox 7wt suspension oil
• Loctite® Threadlocker Blue 242®
Bicycle Tools
• Schrader valve core tool
• High Pressure Shock Pump 600 psi
Before disassembly or service of any air system remove the air pressure from all air chambers and remove the air valve cores.
If your shock will not return to full extension, do not attempt to service or disassemble your shock. Attempting to service a shock that will not return to
full extension can cause severe and/or fatal injuries.
Always wear safety glasses and nitrile gloves when working with suspension fluid.
Place an oil pan on the floor underneath the area where you will be working on the shock.
RockShox Tools
• RockShox Deluxe IFP Height Tool
• RockShox Rear Shock Vise Block
• RockShox Rear Shock Body Vise Block
• RockShox Air Valve Adapter Tool - Rear Shock
Common Tools
• Torque wrench
• 10 mm (RLR/R, 2018 RL/RT) and 12 mm (RT3, 2019 RL/RT) socket
wrenches
• Bench vise with aluminium soft jaws
• 13 and 17 mm open end wrenches
• 13 and 17 mm crowfoot sockets
• 1.5, 2, and 3 mm hex wrenches
• 1.5, 2, and 3 mm hex bit sockets
• Strap wrench
• Pick
• Metric caliper or small metric ruler
⚠ WARNI NG
SAFET Y I NSTRUC TI ON S
Mounting Hardware And Bushing Service section).
Deluxe™ Service 18