SRAM RockShox Deluxe RT3 Service Manual page 33

Install the seal head/air piston onto the damper shaft.
13
Use a vise block with the 10 mm shaft clamp to clamp the shaft
14
into a vise.
To prevent damage to the seal head/air piston, position the shaft in the
vise so that the piston is clear of the vise jaws.
Install the main piston assembly that was removed in step 5 onto the
15
damper shaft. Use your fingers to squeeze the shims and center the
shim stack under the main piston. Use a small pick to center the shim
stack along the inside edge of the main piston.
Be sure to keep the main piston assembly parts in the same order.
If the shims are not centered and in the correct order, the shock will not
perform properly.
NOTI CE
NOTI CE
Piston Service 33