Air Can Service - SRAM RockShox Deluxe RT3 Service Manual

5 0 / 2 0 0 H o u r S e r v i c e
A i r C a n S e r v i c e
N OTIC E
When replacing seals and o-rings, use your fingers or a pick to remove
the seal or o-ring. Spray isopropyl alcohol on each part and clean with
a rag. Apply grease to the new seal or o-ring. Only use RockShox®
Dynamic Seal Grease when servicing RockShox shocks.
Inspect each part for scratches. Do not scratch any sealing surfaces
when servicing your suspension. Scratches can cause leaks.
Use your fingers to remove the o-ring on the outside of the air can.
1
Spray isopropyl alcohol on the air can threads and eyelet body threads
and clean them with a rag.
Install a new o-ring.
Use a pick to remove the air can wiper seal located in the top groove.
2

Air Can Service

23