SRAM RockShox Deluxe RT3 Service Manual page 44

Remove the shock from the vise, turn it over and clamp the damper
3
body eyelet in the soft jaws.
Inject another 1 mL of Maxima® Maxum4 Extra 15w50 into the air can.
Clamp the air shaft eyelet into the vise. Press the air can onto the
4
damper then thread it onto the shaft eyelet until it is hand tight.
Spray isopropyl alcohol on the outside of the air can and clean it with
a rag.
Remove the shock from the vise. Turn it over and clamp the damper
5
body eyelet in the vise.
Stabilize the air can with a strap wrench to prevent it from rotating. Use
a torque wrench with a 13 mm crowfoot to tighten the air can to
4.5 N·m (40 in-lb).
Remove the shock from the vise. Spray isopropyl alcohol on the shock
6
and clean it with a rag.
Install the sag indicator o-ring.
7
15w50
13 mm
1 mL
·m (40 in-lb)
4.5 N
Air Can Installation 44