Switch Compartment: Open - AUMA SAR 16.2 Operation Instructions Manual

SA 07.2 SA 16.2 / SAR 07.2
AC 01.2 Intrusive
User login
Change settings
9.2.

Switch compartment: open

SAR 16.2 Control unit - electromechanical
7. Use Up ▲ Down ▼ to select user:
Information: Required user level: Specialist (4) or higher
The symbols have the following meaning:
- black triangle: ▶ = current setting
- white triangle: ▷ = selection (not saved yet)
8. Ok.
Press
Display indicates: Password 0***
9. Enter password (→ enter password).
The screen indicates the pre-set type of seating (▶Limit or ▶Torque) by means
of a black triangle ▶.
10. Use Up ▲ Down ▼ to select new setting.
The symbols have the following meaning:
- black triangle: ▶ = current setting
- white triangle: ▷ = selection (not saved yet)
11. Confirm selection via
The setting for the type of seating is complete.
12. Back to step 4 (CLOSED or OPEN): Press
The switch compartment must be opened to perform the following settings.
1. Loosen screws [2] and remove cover [1] from the switch compartment.
2. If indicator disc [3] is available:
Remove indicator disc [3] using a spanner (as lever).
Information: To avoid damage to paint finish, use spanner in combination with
soft object, e.g. fabric.
Commissioning (basic settings)
Save.
Esc .
49