AUMA SAR 16.2 Operation Instructions Manual page 78

Technical data
Service conditions
Coating
Colour
Accessories
Wall bracket
Programming software
Torque measurement flange DMF
Further information
Weight
EU Directives
78
SA 07.2 SA 16.2 / SAR 07.2
Double layer powder coating
Two-component iron-mica combination
Standard: AUMA silver-grey (similar to RAL 7037)
Option: Available colours on request
For actuator controls mounted separately from the actuator, including plug/socket connector.
Connecting cable on request.
Recommended for high ambient temperatures, difficult access, or in case of heavy vibration during
service.
Cable length between actuator and actuator controls is max. 100 m (Not suitable for version with poten-
tiometer in the actuator). Instead of the potentiometer, the actuator has to be equipped with an electronic
position transmitter. (MWG requires a separate data cable.)
AUMA CDT (Commissioning and Diagnostic Tool for Windows-based PC)
AUMA Assistant App (Commissioning and Diagnostic Tool for Android devices)
Accessory for torque measurement for SA/SAR 07.2
Approx. 7 kg (with AUMA plug/socket connector)
Electromagnetic Compatibility (EMC): (2014/30/EU)
Low Voltage Directive: (2014/35/EU)
Machinery Directive: (2006/42/EC)
SAR 16.2 Control unit - electromechanical
SA/SAR 16.2
AC 01.2 Intrusive