Extio N3408 Or N3208 Transmitter Card - Matrox Extio N3408 User Manual

Extio N3408 or N3208 transmitter card

Mini DisplayPort
(1.2)
Mini DisplayPort
(1.1)
Mini USB
(2.0)
Note:
included with your product to the mini USB
connector on your transmitter card.
Connect the other end of your cable to a
USB connector on the motherboard of your
system. Make sure your connectors are
properly connected.
Description of supported connections
Connector
Mini DisplayPort
Mini USB
RJ45
LC-LC
16 Matrox Extio 3 Series – User Guide
RJ45
LC-LC
Connect one end of the USB cable
Description
Connect your mini DisplayPort to DisplayPort cable to your Matrox
card. Connect the other end of the cable to your host system.
Note: To connect to this connector, you need a shielded DisplayPort
cable.
Connect one end of your USB cable to the USB connector on your
transmitter card. Connect the other end of your cable to a USB
connector on the motherboard of your system.
Connect an RJ45 cable to this connector.
Connect an LC-LC fiber optic cable to this connector.
Mini DisplayPort
(1.1)
Mini USB
(2.0)
RJ45
LC-LC