Adding Rules To Your Windows Firewall Settings - Matrox Extio N3408 User Manual

Adding rules to your Windows Firewall settings

Note:
more information, see Windows documentation or contact your system administrator.
Windows 10/7 –
Windows 10 – Click
1
Firewall
Windows 7 – Click
Center
Windows 10 – In the left panel, click
2
Windows 7 – In the left panel, click
Click
3
In the
4
In the
5
54 Matrox Extio 3 Series – User Guide
You may need administrator rights to modify your Windows Firewall settings. For
Start
.
Control Panel
*. (* Depending on your configuration, these steps may be unnecessary.)
.
Inbound Rules
panel, click
Actions New Rule
– Select .
Rule Custom
– Select
Program All programs
– Next to
Protocol and Ports
. For the port number, enter
ports
– Under the remote IP address, add the IP range you want to use for your
Scope
transmitter. You can use a range (such as 192.168.1.0/24) or a single IP address (such
as 192.152.168.62).
– Select
Action Allow the connection
– Select the network location of your system (
Profile
– Enter the name for your rule (such as Extio 3 – TCP rule).
Name
panel, click
Actions New Rule
– Select
Rule type Custom
– Select
Program All programs
– Under
Protocol and Ports
– Under the remote IP address, add the IP range you want to use for your
Scope
transmitter. You can use a range (such as 192.168.1.0/24) or a single IP address (such
as 192.152.168.62).
– Select
Action Allow the connection
Settings Network & Internet
Network and Internet
Advanced Settings
Windows Firewall
. Configure the new rule with the following settings:
.
, select
Protocol TCP
. Next to
445 Remote port
.
. Configure the new rule with the following settings:
.
.
, select
Protocol type
.
Ethernet Windows
*
Network and Sharing
.
Advanced Settings
. Next to , select
Local port
, select
All Ports
, , or
Domain Private
.
ICMPv4
.
Specific
.
).
Public