Updating Your Matrox Extio 3 Firmware (Point-To-Point Mode) - Matrox Extio N3408 User Manual

Update the firmware
7
When you're done adding Extio 3 devices to the list of devices you want to update, click
Update
For more information on the device update process, click
the program window.

Updating your Matrox Extio 3 firmware (point-to-point mode)

You can update the firmware of a single Extio 3 transmitter or of an Extio 3 transmitter and receiver
pair (in point-to-point mode) using the USB connection between your host system and transmitter
unit.
Download and extract the firmware package
1
Download the latest firmware package and extract the files to a local folder (for example,
C:\Extio3FirmwareUpdate) on your host system (the system connected to your Extio 3
transmitter). If you don't select a local folder, the files will automatically extract to C:\Matrox.
Run the Updater from host file
2
On your host system, browse to the folder containing the extracted files, then run the
Updaterfromhost.exe file.
Update the firmware
3
Make sure the devices you want to update are listed in the program window. Devices that
require an update are listed with a green status bar.
Click
Update
minutes).
. Wait while the devices are being updated (up to 20 minutes).
to update your devices. Wait while the devices are being updated (up to 20
( ) at the bottom of
Show log
Matrox Extio 3 Series – User Guide 31