Installing the SFP module
When installing the SFP (Small Form Factor Pluggable) module, make sure you properly secure the
module in its housing.
Close the latch handle.
1
2
Push the module into the SFP
housing in your Matrox product.
Make sure the module is properly
oriented. A properly oriented
module should slide easily into the
housing.
Make sure the SFP module is
3
inserted all the way into the
housing, When locking in place,
you may hear a "click" sound. To
make sure the SFP module is
securely inserted, you can pull
gently on the module without
lowering the latch handle.
Removing the SFP module
WARNING:
securely locked in its housing. Forcing the SFP
module out of its housing without unlocking it
may damage your SFP module, the housing, or
your Matrox product.
22 Matrox Extio 3 Series – User Guide
A properly installed SFP module is
(RJ45 SFP module shown)