Table of Contents
Advertisement
Step-by-step installation
WARNING:
transmitter card, make sure the SFP module
is removed. For more information on
removing the SFP module,
the SFP module", page
Choose an expansion slot
1
Most systems have different types of
expansion slots. Choose a PCI Express® ×8
or ×16 (PCIe®) slot. Your system manual
should identify the location of each type of
expansion slot in your system.
Insert your Matrox card
2
Position your Matrox card over the
a
expansion slot you've chosen.
Push the card in firmly and evenly until
b
it's fully seated in the slot.
Secure the bracket of your Matrox card
c
to the frame of your system.
Your Matrox card is now installed. If you're installing more than one card,
cards", page
13. Before restarting your system, connect your devices (see the "Connection setup"
section for the card you want to connect).
12 Matrox Extio 3 Series – User Guide
Before installing your
see "Removing
22.
RJ45 SFP module shown
(Back of system)
see "Installing multiple
(×16)
(×8)
Hide quick links:
Advertisement
Table of Contents
