Table of Contents
Advertisement
Description of LEDs
The LED on your Extio 3 device provides information to help you troubleshoot your Extio 3 product.
The following describes the LED on your Extio 3 device.
Power/status LEDs
The LEDs on your device provide information on the power and status of your device.
Extio N3408 or N3208 transmitter card
LED color
Green (solid)
Green (fast blink)
Amber (solid)
Amber (slow blink)
Amber (fast blink)
Red (solid)
Red (slow blink)
Red (fast blink)
24 Matrox Extio 3 Series – User Guide
Status LED
Driver is ready.
Configuration reset in process.
Card is in maintenance mode.
Card is restarting in maintenance mode.
Device is updating the firmware.
No source detected.
No network detected.
Device has detected a fatal error. Try rebooting your device. If,
after rebooting your device, the LED is still red, contact your
vendor for technical support
57). For more information on rebooting your Extio 3 device,
"Rebooting or resetting your Extio 3 device", page
(see "Customer support", page
see
41.
Hide quick links:
Advertisement
Table of Contents
