Table of Contents
Advertisement
Overview
Thank you for purchasing a Matrox Extio 3 Series product. Matrox Extio 3 is an IP KVM extender
that enables you to work on a computer from a distance. It captures the peripheral signals from the
computer (such as the keyboard, video, mouse, audio, and other peripherals) and extends these
signals to a remote location.
Matrox Extio N3408 IP KVM extenders support up to four (4) monitors. Matrox Extio N3208 IP
KVM extenders support up to two (2) monitors.
Hardware supplied
Depending on your Extio 3 device, the following hardware is supplied:
Extio N3408 or N3208 transmitter card – Transmitter card, 1 USB cable (A to mini B
connectors), RJ45 transceiver.
Extio N3408 or N3208 transmitter unit – Transmitter unit, 1 USB cable (A to B
connectors), 1 power supply.
Extio N3408 or N3208 receiver unit – Receiver unit, 1 power supply.
On-screen display (OSD)
Extio OSD – to manage and use your point-to-point Extio 3 devices through an
On-Screen Display (OSD). If your Extio 3 devices are networked, you can use the OSD
to log into to your receiver and switch to different transmitters. The OSD is available only
on your receiver device.
Software available
Extio Central Manager – to remotely manage, monitor, and configure your networked
Extio 3 devices. For more information,
software", page
* The hardware supplied with your Matrox product may vary depending on the SKU or part number of your product. For more
information, contact your Matrox representative.
*
37.
see "Installing Matrox Extio Central Manager
Matrox Extio 3 Series – User Guide
7
Hide quick links:
Advertisement
Table of Contents
