Using The Osd (On-Screen Display) - Matrox Extio N3408 User Manual

Using the OSD (On-Screen Display)

Accessing the OSD
The OSD is available only with Extio 3 receiver devices. To access the OSD, enter the OSD keyboard
shortcut on the keyboard connected to your receiver. The default keyboard shortcut is the [Scroll
Lock] key.
Changing the OSD keyboard shortcut
You can change the keyboard shortcut used to access the OSD. To change the keyboard shortcut, use
the
OSD settings
Enabling point-to-point operation mode
Note:
from networked mode to point-to-point mode), you need to perform a configuration reset
of your devices. For more information,
page
To use your devices in point-to-point mode, click
for the mode to be enabled. For more information,
38 Matrox Extio 3 Series – User Guide
option.
To change the operation mode of your Extio 3 configuration (for example, changing
43.
see "Changing the operation mode of your devices",
from the OSD startup screen. Wait
Point-to-Point
see "Configuring your Extio devices", page 39.