Description Of Leds - Matrox Avio F120 Series User Manual

Connector
USB HID
VGA+DVI SL
VGA+DVI SL/DL
* While using a dual-link display resolution (such as 2560 x 1600) with the
connectors of your units, the

Description of LEDs

The LEDs on your Matrox unit provide status information on your unit and its optical connection.
The following describes the different LEDs:
Power and status
Optical
connection
12 Matrox Avio Series – User Guide
Description
Connect only your USB HIDs (Human Interface
Devices, such as keyboard and mouse) to this
connector. A maximum of four (4) USB HIDs can
be connected to your receiver unit.
*
Connect your analog (VGA) monitor or digital
(DVI) single-link monitor to this connector.
Monitors attached to this connector on the
transmitter and receiver units use the same
display resolution and monitor settings.
*
Connect your analog (VGA) monitor or digital
(DVI) single-link or dual-link monitor to this
connector.
Monitors attached to this connector on the
transmitter and receiver units use the same
display resolution and monitor settings.
DVI SL and
Green
Unit is operational.
Green
Optical connection
active.
DVI SL/DL and
VGA+DVI SL connectors are disabled.
Red
Error detected.
Orange
No transceiver
detected or no
optical connection
established.
Required host
connection
TX: Main USB
RX: Main USB
or Dedicated
USB links
DVI-SL
DVI-SL/DL
VGA+DVI SL/DL
No LED (black)
No power.
Red
Major
communication
error.