Fixing The Ups - Delta Ultron HPH Series User Manual

If you need to move the UPS over a long distance, please use appropriate equipment
like a forklift. Do not use the UPS casters to move the unit over a long distance.
5.4

Fixing the UPS

Please follow the steps below:
1
information, please refer to Table 5-1.
2
After the UPS is moved to the designated installation area, use a #17 wrench to
3
Use a 17mm socket wrench and two M10 screws
balance support on the pallet) to install the front balance support (removed during the
unpacking process) at the front of the UPS. Use the two expansion screws
UPS movement. Please see Figure 5-3.
4
Use a 17mm socket wrench and two M10 screws
balance support on the pallet) to install the rear balance support (removed during the
unpacking process) at the rear of the UPS. Use the two expansion screws
UPS movement. Please see Figure 5-4.
1
M10 Screw
x 2
Expansion
Screw x 2
(Figure 5-3: Balance Support Installation_ Front of the UPS)
1
(Front View)
B Y
P A
S S
S W
I T C
H
M A
N U
A L
B Y
P A
S S
S W
I T C
H
2
1
5-5
5 Installation and Wiring
2
Balance
Support
Ground
(originally used to fix the rear
2
(provided
(provided