System And Safety Information; Prior To Operation; Touch Pad Diagram - Lippert Components Ground Control 3.0 User Manual

System and Safety Information

Failure to act in accordance with the following may
result in death or serious personal injury. The use of
the Ground Control® 3.0 leveling system to support
the trailer for any reason other than which it is
intended is prohibited by Lippert's limited warranty.
The Lippert leveling system is designed as a leveling
system only and should not be used to provide
service for any reason under the trailer such as
changing tires or servicing the leveling system. Any
attempts to change tires or perform other service
while trailer is supported by the Ground Control®
3.0 leveling system could result in death, serious
injury or damage to the 5th wheel.
Be sure to park the trailer on solid, level ground. Clear
all jack landing locations of debris and obstructions.
Locations should also be free of depressions. When
parking the trailer on extremely soft surfaces, utilize
load distribution pads under each jack. People and
pets should be clear of the trailer while operating
leveling system. Never lift the trailer completely off
the ground. Lifting the trailer so the wheels are not
touching the ground will create an unstable and
unsafe condition.
Moving parts can pinch, crush or cut. Keep clear and
lci1.com
use caution.
(574) 537-8900
Ground Control® 3.0
Aftermarket Manual

Prior to Operation

The leveling system should only be operated under the
following conditions:
1. The trailer is parked on a reasonably level surface.
2. Be sure all persons, pets, and property are clear of the trailer
while the leveling system is in operation.
3. Make sure battery(ies) are fully charged and test at 12+VDC
under load.

Touch Pad Diagram

A E
B
C
D F
Fig.22
Letter Description
A Up Arrow - Scrolls up through menu on LCD
B Down Arrow - Scrolls down through menu on LCD
C Enter - Activates modes and procedures on LCD
D Retract - Places system into retract mode (Press
and hold down for 1 second to initiate Auto Retract)
E LCD Display - Displays procedures and results
F Auto Level - Places system into auto level mode
G Front Button - Activates both front jacks
H Left Button - Activates left jack(s)
I Right Button - Activates right jack(s)
J Rear Button - Activates rear jacks
K Power Button - Turns system on and off
13
CCD-0001307
K
G
H I
J
Rev: 04.19.18