Component Description; Safety - Lippert Components Auto Level Owner's Manual

Note: Images used in this document are for reference only when assembling, installing and/or operating
this product. Actual appearance of provided and/or purchased parts and assemblies may differ.

Component Description

1. Jacks
A. Rated at a lifting capacity of 8,000 lbs each.
B. Standard 9" diameter (63.5 sq in) foot pad on a ball swivel for maximum surface contact on all
surfaces.
C. System operation is powered by a 12V DC motor/pump assembly.
2.
Motor/Pump Assembly
A. 12V DC motor
B. Hydraulic fluid reservoir tank, 1.2 gal
C. Control valve manifold
D. Solenoid valve for directing control
3.
System Controls
A. Controlled electronically from the touchpad
B. Touchpad can be operated in manual mode or fully automatic mode
4.
Fittings and Hoses
A. Fittings - High pressure O-Ring Face or JIC - Size 4
1/4
B. Hose -
" I.D., 3000 psi - W.P. Rated

Safety

Please read and study the operating manual before operating the leveling system.
the "WARNING" symbol above is a sign that an installation procedure has a safety risk involved and may
cause death or serious injury if not performed safely within the parameters set forth in this manual.
the "CAUtIoN" symbol above is a sign that a procedure has risk involved that may cause personal injury
and/or product damage if not performed safely and within parameters set forth within this manual.
During servicing make sure that the coach is supported according to the manufacturer's
recommendation. Lift the coach by the frame and never the axle or suspension. Do not go under
the coach unless it is properly supported. Unsupported coaches can fall causing death or personal
injury or product or property. Use proper personal protective equipment damage.
Failure to act in accordance with the following instructions may result in serious personal injury or death.
The use of the Lippert Components, Inc. Hydraulic Leveling System to support the coach for any reason
other than which it is intended, is prohibited by the Lippert Limited Warranty. The Hydraulic Leveling
System is designed as a leveling system only and should not be used for any reason to provide service under
the coach, e.g. changing tires or servicing the leveling system. Lippert Components, Inc. recommends that a
trained professional be employed to change the tires on the coach. Any attempts to change tires or perform
other service while the coach is supported by the hydraulic leveling system could result in damage to the
coach and/or cause serious injury or death.
Rev: 06.25.20
Moving parts can pinch, crush, or cut. Keep clear and use caution
Page 3
CCD-0001515