Safety; Important Safety Information - Lippert Components Bed Lift Assembly And Operation Manual

Safety

Read and understand all instructions before installing or operating this product. Adhere to all safety labels.
This manual provides general instructions. Many variables can change the circumstances of the instructions,
i.e., the degree of difficulty, operation and ability of the individual performing the instructions. This
manual cannot begin to plot out instructions for every possibility, but provides the general instructions,
as necessary, for effectively interfacing with the device, product or system. Failure to correctly follow the
provided instructions may result in death, serious personal injury, severe product and/or property damage.

Important Safety Information

• Safety devices shall NOT be tampered with for any reason.
• It is strictly forbidden to be on the bed lifting system while it is being operated.
• Do NOT interfere with the bed lifting system while operated, neither with any objects or with hands.
• Before starting the vehicle engine and driving, always make sure the bed lifting system is in its highest
position and the safety belts are fastened (excluding garage bed).
• Do NOT operate the system improperly (e.g. with people on it).
• The bed lifting system shall only be used by adults and responsible staff.
• It is forbidden to use the bed lifting system while the vehicle is running.
• Do NOT move the bed lifting system if people or animals or items are around, under or on it.
• The bed lifting system must never be used while the vehicle is running.
• It is forbidden to start the bed lift system manually with disconnected wires from motor unit to control unit.
• Should the mechanism not work, do NOT use the bed and ask for assistance at the next service center.
• Always install the bed lifting system taking into account the system maximum load. The bed unit, as a whole
- Including bed lifting system, mattress, pillow, blankets, etc. - MUST NOT weigh more than 60 kg (132 lbs).
• The bed lifting system can bear a total maximum weight of 363 kg (800 lbs).
The "WARNING" symbol above is a sign that a procedure has a safety risk involved and may cause
death or serious personal injury if not performed safely and within the parameters set forth in
Failure to follow instructions provided in this manual may result in death, serious personal injury
and/or severe product and property damage, including voiding of the component warranty.
The "CAUTION" symbol above is a sign that a safety risk is involved and may cause personal injury
and/or product or property damage if not safely adhered to and within the parameters set forth
Always wear eye protection when performing service, maintenance or installation procedures.
Other safety equipment to consider would be hearing protection, gloves and possibly a full face
Moving parts can pinch, crush or cut. Keep clear and use caution during assembly.
Rev: 11.19.20
this manual.
in this manual.
shield, depending on the nature of the task.
Page 3
CCD-0002764