Resetting The Remote - Lippert Components Ground Control 3.0 User Manual

10. Enter a pin to be the security code for accessing the remote
(Fig. 43).
11. Once a pin is entered the "Save" button (Fig. 44A) will appear
at the bottom right of the screen. To confirm the pin press
"Save".
12. Re-enter the pin and save to confirm it.
Note: This pin will be required to access the remote and any
functions configured into it. Write the pin down for later
reference.
Fig.43
lci1.com
Fig.44
A
(574) 537-8900
Ground Control® 3.0
Aftermarket Manual

Resetting the Remote

Once the remote has been configured it can be reconfigured
in the event of a function changing or a new security pin is
required.
1. Turn the remote on by pressing and releasing the large silver
button at the bottom of the remote (Fig. 45C).
2. Press the large silver button 5 times (Fig. 45C).
3. Two options come up for reconfiguration:
A. "Set Pin" (Fig.45A) will allow the user to reset the pin and
enter a new one. Once the "Set Pin" option is selected the
user will be asked for verification that they want to reset the
pin (Fig. 46). Select "Yes" and the pin will be reset, follow
steps 10-12 of the "Configuring the Remote" section. Select
"No" to keep the current pin.
B. "Config" (Fig. 45B) will allow the user to adjust the
configuration. To do so, select "Config" and follow steps
1-9 of the "Configuring the Remote" section.
A
Fig.45
C
21
CCD-0001307
Fig.46
B
Rev: 04.19.18