Math Waveform Vertical Control - Rigol DS4024E User Manual

Chapter 6 Operations and Measurements

MATH Waveform Vertical Control

Press MATH  Operate and select the desired math operation to open the
corresponding math operation submenu. In the submenu, you can adjust the vertical
scale and vertical position of the math operation waveform according to your need.
1. Adjust the vertical scale
Press and turn the multi-function knob
the math operation waveform within the adjustable range at 1-2-5 step
sequence.
Turn the knob clockwise to reduce the vertical scale and counterclockwise

to increase the vertical scale.
The adjustable range is related to the math operation currently selected

and the vertical scale of the source channel.
The current vertical scale information of the math operation waveform is

displayed at the lower-left side of the screen. During the adjustment, the
information changes accordingly.
2. Adjust the vertical position
Press and turn the multi-function knob
the math operation waveform within the adjustable range at a specified step.
Turn the knob clockwise to increase the vertical scale and counterclockwise

to reduce the vertical scale.
The adjustable range is related to the current vertical scale of the math

operation waveform.
When adjusting the vertical position of the math operation waveform, the

vertical position information (as shown in the figure below) pops up at the
lower-left side of the screen in real-time.
DS4000E User's Guide
to adjust the vertical scale of
to adjust the vertical position of
RIGOL
6-19