To Prepare The Oscilloscope For Use; To Remove The Protective Cover; To Adjust The Supporting Legs - Rigol DS4024E User Manual
Ds4000e series; digital oscilloscope
Hide thumbs
Also See for DS4024E:
- Quick manual (36 pages) ,
- Programming manual (278 pages) ,
- User manual (42 pages)
Table of Contents
Advertisement
RIGOL
Chapter 1 Quick Start
To Prepare the Oscilloscope for Use
To Remove the Protective Cover
Before using the oscilloscope, remove the front panel cover. Grasp the transverse
tabs on each side and pull them outward to remove the cover.
Front Panel Cover
Transverse Tab
Figure 1-3 To Remove the Protective Cover
To Adjust the Supporting Legs
Adjust the supporting legs properly to use them as stands to tilt the oscilloscope
upwards for stable placement of the oscilloscope as well as better operation and
observation. Unfold or fold the supporting legs in the directions of the arrows as
shown in the figures below.
Figure 1-4 To Adjust the Supporting Legs
1-4
DS4000E User's Guide
Advertisement
Table of Contents
