Chapter 9 Pass/Fail Test - Rigol DS4024E User Manual

Chapter 9 Pass/Fail Test

Chapter 9 Pass/Fail Test
The Pass/Fail test function is used to monitor the change of the signal and judge
whether the instrument passes or fails the test by judging whether the input signal is
within the user-defined mask.
The contents of this chapter:
To Enable or Disable the Pass/Fail Test Function

To Start or Stop the Pass/Fail Test Operation

To Specify the Source

To Set the Test Mask

To Turn the Test Result Display On/Off

To Set the Output Form of Test Failure

To Save the Test Mask Range

To Load the Test Mask Range

DS4000E User's Guide
RIGOL
9-1