Troubleshooting; Vscan Extend Troubleshooting - GE Vscan Extend User Manual

Vscan Extend Maintenance

Vscan Extend troubleshooting

Problem
Vscan Extend has no power.
Vscan Extend is not charging.
Display screen is blank when the
device is powered on.
Parts of the image is missing
when scanning.
Noise when moving the probe
cable.
No image displayed when
scanning.
6-14
Table 6-2:

Troubleshooting

Possible cause
Battery not inserted.
Battery not charged.
Battery defect or end of life.
Broken battery connection.
Battery not inserted.
Battery defect or end of life.
Broken battery connection.
Defective AC adapter or charger.
Mains power is down.
Temperature is outside the
specified limits.
Connection broken during
software loading.
Channels are missing.
Defective probe cable.
Defective probe.
Troubleshooting
Insert battery (see page 3-20)
Charge the battery (see
page 3-18)
Contact GE Service (see
page 1-10)
Contact GE Service (see
page 1-10)
Insert battery (see page 3-20)
Contact GE Service (see
page 1-10)
Contact GE Service (see
page 1-10)
Contact GE Service (see
page 1-10)
Ensure the ambient temperature
is within the specified limits (see
'Environmental requirements for
the device' on page 3-3)
Contact GE Service (see
page 1-10)
Contact GE Service (see
page 1-10)
Contact GE Service (see
page 1-10)
Contact GE Service (see
page 1-10)
Vscan Extend
5721203-100 Rev. D
Solution
–
User Manual