GE Vscan Extend User Manual page 83

Connecting Wi-Fi
NOTE:
NOTE:
NOTE:
NOTE:
NOTE:
–
Vscan Extend User Manual
5721203-100 Rev. D
If Wi-Fi is not detected, configure Wi-Fi. See 'Configuring Wi-Fi'
on page 4-23 for more information.
1. Select your Wi-Fi network and enter your Wi-Fi password.
(All non hidden Wi-Fi networks are displayed.)
Figure 3-19. Wi-Fi settings
2. Press Next.
Ensure that the Vscan Extend is connected to a non-clinical
Wi-Fi hotspot to start activation.
A non-clinical Wi-Fi has access to the public internet, which is
not part of the hospital internet. If you are unable to view the
non-clinical Wi-Fi or do not have the password, contact your
system administrator.
If you do not have access to public Wi-Fi, proceed with manual
activation of the device. See 'Manual activation' on page 3-35
for more information.
If the hospital network does not have an internet connection,
proceed with manual activation of the device. See 'Manual
activation' on page 3-35 for more information.
Initial use
3-27