GE Vscan Extend User Manual page 101

Configure Worklist Server (continued)
NOTE:
NOTE:
–
Vscan Extend User Manual
5721203-100 Rev. D
"Verify OK" pop-up displays if the communication with the
Worklist Server is ok.
If communication fails:
• check the server settings and make necessary
corrections.
• Vscan Extend and the DICOM image server are not
connected to the same network. Check network settings
for all components.
5. Press and hold the selected Worklist entry to add to the
favorites list. By default, the first added Worklist server is set
as the favorite. To remove a Worklist server from the
favorites list, press and hold on the server name. If you wish
to change it, press and hold to remove the current favorite
and add the preferred server.
Figure 4-8. Add to favorites
If only one DICOM MWL server is configured, it is
automatically set as the favorite.
The scheduled exam list will automatically be pulled from
the favorite server.
Settings
4-7