Method Of Cleaning: Manual - GE Vscan Extend User Manual

Vscan Extend Maintenance
Cleaning instructions
CAUTION
Cleaning the probe
Cleaning the USB door

Method of cleaning: Manual

CAUTION
6-6
Avoid any liquid making contact with the internal device
components, including the micro USB connector and battery
terminal contacts, which are not designed for making contact
with liquids.
1. Remove the gel by wiping the probe lens with a soft cloth.
2. Wipe the probe and cable with a soft cloth moistened with a
warm soap and water solution (<80
3. Wipe the probe and cable with a soft cloth moistened with
clean water (<80
4. Wipe dry with a soft towel.
1. Open the USB door.
2. Wipe the inside of the door with a soft cloth moistened with a
mild, general purpose, non-abrasive soap and water
solution.
3. Wipe dry with a soft cloth.
Figure 6-1. Open the USB door
DO NOT use brush, abrasives, sharp tools or any other
methods that may damage the inside or surface of the device.
DO NOT scratch or press any part of the Vscan Extend with a
sharp object, such as pencils or pens, as this may result in
damage to Vscan Extend.
0
F/27
0 0
F/27 C) until all soap is removed.
Vscan Extend
0
C).
–
User Manual
5721203-100 Rev. D