Scanning; General Scanning Recommendations - GE Vscan Extend User Manual

Using Vscan Extend

General scanning recommendations

Before each use:
After Each Use
WARNING
5-2
Inspect the transducer (see 'Before each use' on page 6-3).
• Inspect the transducer (see 'Cleaning the probe' on
page 6-6)
• Clean the transducer (see 'Disinfecting the probe' on
page 6-9).
• If required, clean the device and the display (see
'Disinfecting the device' on page 6-7).
• If required, disinfect the transducer (see 'Disinfecting the
probe' on page 6-9).
Ensure that the main unit and the transducer are properly
cleaned after each use and before storing in the case.
If any damage is found on the transducer or its cable, DO NOT
use the Vscan Extend. Contact GE service.

Scanning

–
Vscan Extend User Manual
5721203-100 Rev. D