Additional Setup Tasks - DataCard CR500 Installation And Administrator's Manual

7.
When you finish using Printer Manager, select Log Out > Log Out from the menu. For
security, close the browser window after you log out.

Additional Setup Tasks

You might need to set up additional card features in Printer Manager, including:
Magnetic stripe format

Bend Remedy

K Power

PeelOff Power

Resin Black Mode

Retransfer Roller Temp

YMC Power

Follow the guidance of your system administrator, and make changes only if needed. Refer to
"Printer Manager Settings"
Printer Manager.
44
on page 50 for information about how to specify these settings in
Install the Printer