DataCard CR500 Installation And Administrator's Manual page 46

8.
Press E
NTER
If Request Success displays on line 2 of the touch screen the printer is activated.

If another message displays on line 2 of the touch screen, system activation failed.

Repeat step 7. If activation fails again, contact Entrust Datacard Technical Phone Support
at 1-800-328-3996.
9.
Press the U
SER
steady green.
The printer is ready for additional setup and to print cards. Continue with
Printer IP Address"
32
(h) to submit the code.
button (i) repeatedly until Ready displays on line 1 and the U
on page 33.
button glows
SER
"Set or Retrieve the
Install the Printer