b.
Press E
Activate displays on line 1 and Enable displays on line 2.
c.
Press E
7.
Enter the activation code:
a.
Beginning with the left-most place, press the up arrow or down arrow keys (f) to display
the numbers and letters of the activation code at the cursor position.
b.
Press E
c.
Repeat steps 7a and 7b until all characters are correct. The cursor should display to the
right of the final digit.
CR500 Instant Issuance System Installation and Administrator's Guide
(d) to select Activate.
NTER
(e) to enter the Enable submenu.
NTER
(g) to select the character and move the cursor to the right.
NTER
31