Printer Dimensions; Work Surface - DataCard CR500 Installation And Administrator's Manual

Printer Dimensions

The external printer dimensions are shown in the following illustrations.

Work Surface

The printer requires a sturdy work surface at least 45 inches (1.143 m) wide and 19 inches
(483 mm) deep.
If you plan to use the bolt-down feature, you must be able to drill a hole through the work
surface and you must have access to the underside of the work surface. (Refer to
Down Feature"
12
on page 16.)
21-3/8 in.
(54.3 cm)
"Use the Bolt-
Plan the Installation