Behavior - DataCard CR500 Installation And Administrator's Manual

Behavior

Use the Printer Setting menu Behavior options to control the printer operation.
Option
ActivityLogExternal
ActivityLogInternal
ContactAutoDetect
ContactlessATRMode
DPCL
DPCL2
CR500 Instant Issuance System Installation and Administrator's Guide
Description
Enable or disable writing the activity log to an external syslog server.
Default: Enabled
Enable or disable the internal activity log.
Default: Enabled
This setting supports legacy smart card clients. It overrides the
smart card protocol sent by the client to the printer and uses
SCARD_PROTOCOL_T0_OR_T1.
Default: Disabled
Select the default ATR mode for the DUALi contactless smart card
reader. The possible values are:
Vendor: Uses the ATR mode specified by the vendor. The

generated ATR may not be compatible with all smart card
applications or card types.
PCSC: Uses the PC/SC protocol to generate the ATR.

CCID: Uses the CCID protocol to generate the ATR.

Legacy: Uses the ATR mode currently in use by the reader.

AppSpecifies: Allows the smart card application to control the

ATR mode.
Default: Legacy
Note: A smart card application may specify to receive the ATR in a
different format regardless of this setting. However, when the printer
restarts, the smart card reader returns to the setting specified here.
Consider whether you want to specify the format on a job-by-job
basis or modify the Printer Manager setting to use the desired ATR
format.
Enable or disable DPCL command access to the printer through the
unsecured port.
Default: Enabled
Enable or disable DPCL2 command access to the printer through the
unsecured port.
Default: Enabled
59