Set Up Network Access - DataCard CR500 Installation And Administrator's Manual

10.
IP Address displays on line 2. Press E
11.
The printer's IP address displays. Write down the printer's IP address.
12.
Press the U
changes from amber to green.

Set Up Network Access

Work with your network support personnel to make sure the printer is set up within your
organization.
The following tasks typically need to be performed:
Have the IP address of the printer available.

Set up network security. This includes setting up the https protocol for the printer, for users

who communicate with the printer, and for CardWizard issuance software.
Define network permissions to the printer and to CardWizard software.

Define the printer to CardWizard issuance software. Refer to the Datacard CardWizard

Issuance Software and Card Printer Setup Guide for more information.
Your organization is responsible for network setup and security.
40
button (i) repeatedly until Ready displays on line 1 and the U
SER
(h) to select the IP Address menu item.
NTER
button
SER
Install the Printer