Printer Configuration - DataCard CR500 Installation And Administrator's Manual

Printer Configuration

This section describes the tasks you need to perform to set up the printer in your network
environment. Some tasks must be directed by your network support personnel.
Perform these tasks in the order listed.
1. Activate the Printer
2. Set a Static Printer IP Address
Or
Retrieve the Printer IP Address
3. Set Up Network Access
4. Access Printer Manager
a. Print a Test Card
b. Additional Setup Tasks
5. Set Up CardWizard Issuance Software
28
on page 29
on page 33
on page 38
on page 40
on page 41
on page 42
on page 44
on page 45
Install the Printer