DataCard CR500 Installation And Administrator's Manual page 50

12.
Enter the assigned IP address obtained in
The IP address has four bytes, separated by periods. The values shown in the illustration are
an example. Use the address values supplied by your network support personnel.
Begin with the 3-digit byte on the left.
a.
Press the up arrow or down arrow keys (i) to enter the first byte.
b.
Press E
NTER
The address byte displays three digits when it can be changed.
c.
Repeat
d.
When all four bytes are updated, press E
36
(j) to move to the next byte.
step 12a and step 12b for the remaining address bytes.
step 1.
(k).
NTER
Install the Printer