Site Requirements; Printer Dimensions; Single-Hopper Printer - DataCard CR825 Installation And Administrator's Manual

Site Requirements

Set up and use the printer in an environment that meets the following requirements.
Use a single-phase, 3-wire, grounded receptacle.

Place the system and its supplies in a clean office environment, keeping paper and foreign

materials off of the equipment.
Place the printer on a sturdy, level surface.

Place the printer away from direct sunlight.

Do not place the printer near heating ducts, fans, or other air vents.

Do not use the printer for purposes other than the intended use.

Provide space for the printer and for clearance around the printer. The printer dimensions

and clearance area are shown in the following sections.

Printer Dimensions

The external printer dimensions are shown in the following illustrations.

Single-Hopper Printer

15.6 in
397 mm
CR825 and CE875 Instant Issuance System Installation and Administrator's Guide
10.1 in
257 mm
21.4 in
544 mm
3