Names And Functions Of Front Controller Parts; Names And Functions Of Front Panel Parts - Ikegami HTM-1917R Operation Manual

4-3. Names and Functions of Front Controller Parts

(1) Names and functions of front panel parts

① INPUT SELECT switch
INPUT SELECT
A
B
C
KXT
STNC
⑥ EXT SYNC LED
Meaning of abbreviations in the following description
• SDTV: 480i, 575i
• HDTV: 1035i, 1080i, 720p
• SD-SDI: SDTV(525i,625i)SDI
• HD-SDI: HDTV(1035i,1080i,720p)SDI
① INPUT SELECT switch
Use the and ∂ switches to switch the input chan-
nels A/B/C of each module. With the module hav-
ing only one input channel (DKH-511), this switch
is inoperative.
As the SYNC INT/EXT setting is memorized by
channel (A, B, C, YPbPr/RGB-A or YPbPr/RGB-B)
for analog inputs, it is switched automatically to-
gether with the channel switching.
As the ASPECT 4:3/16:9 setting is memorized by
channel (A, B, C, YPbPr/RGB-A, YPbPr/RGB-B,
SDI-A or SDI-B) irrespective of the format, it is
switched automatically together with the channel
switching.
② DIGITAL switch
Set to ON when selecting the MULTI-SDI, HD-SDI
or SD-SDI module.
The switching method differs as follows according
to the mounting state of the SDI module.
a) When only one SDI module is mounted.
Set the DIGITAL switch to ON.
② DIGITAL switch
③ YPbPr／RGB switch
⑦ MONO(SPLIT) switch
⑧ APT switch
⑨ ASPECT switch
MONO
DIGI YPbPr/RGB
SPLIT APT ASPECT
2nd
TEST MARK
COMB
SLOT
⑬ MARKER switch
⑫ COMB switch
⑤ TEST switch
④ 2nd SLOT switch
Fig. 4-3-1. Front Panel
⑩ SCAN switch
⑭ DELAY switch
FUSE
SCAN DELAY
HUE CHROMA
MANUAL
R G B
SCREENS
PRESET
⑮ HUE switch and control
⑪ SCREEN switches
b) When two SDI modules are mounted.
MULTI-SDI or HD-SDI can be selected only with
the DIGITAL switch. To select SD-SDI, set the
2nd SLOT switch to ON as well.
As the ASPECT 4:3/16:9 setting is memorized by
channel irrespective of the format, it is switched
automatically together with the channel switch-
ing.
③ YPbPr/RGB switch
Set to ON when selecting the YPbPr/RGB input.
Switch between YPbPr and RGB at the MENU 1-4
item.
As the SYNC INT/EXT setting is memorized by
channel (A or B) for YPbPr/RGB, it is switched au-
tomatically together with this switch. Two chan-
nel (A or B) is option.
As the ASPECT 4:3/16:9 setting is memorized by
channel irrespective of the format, it is switched
automatically together with the channel switch-
ing.
④ 2nd SLOT switch
When there are two SDI modules (e.g. DKM-
511+DK801A) or two decoder modules (e.g. DE-
801+DE-811), switch to the second slot using the
2nd SLOT switch.
a) For SDI module
The SD-SDI is assigned to the 2nd SLOT.
b) For decoder module
The DE-811 is assigned to the 2nd SLOT.
14
⑲ FILE LED
BRIGHT CONT FILE
1
2
3
⑱ CONTRAST switch and control
⑰ BRIGHTNESS switch and control
⑯ CHROMA switch and control
HTM1917R
COLOR MONITOR