(3) SD-SDI input module
SDI
4:2:2
CH A
CH B
(
)
MONITOR
OUT
(4) NTSC/PAL-B decoder input module
NTSC
CH A
CH A
CH B
CH C
SD-SDI module
SDI
4:2:2 digital component module (DK-801A)
4:2:2
SD-SDI A/B input
• Input the SD-SDI signal here according to the following module.
DK-801A: 4:2:2 serial digital component signal
• When this module and multi SDI module are mounted together, this module will be assigned to the
2nd slot. To select the 2nd slot, press the 2nd slot switch.
SD-SDI A output
• The SD-SDI signal input to the A channel output here.
SD-SDI B output
• The SD-SDI signal input to the B channel is
output from here.
• The signal selected at the monitor can also be
output from here by setting the connector inside
the module.
Decorder module
NTSC 3 line comb decorder module (DE-801)
NTSC
NTSC/PAL general-purpose decoder module (DE-811)
NTSC/PAL
NTSC/PAL-B analog composite input
• Input NTSC/PAL-B analog composite signal here.
• If not adopting the loop through connection method, connect the terminated plug.
• When using in the external sync mode, input the external sync signal into the SYNC input
connector of VIDEO PROCESS module described in the above (1) section.
11
<Setting Method>
NORMAL(Default)
MONITOR OUT