View The Progress Of A Phone Firmware Upgrade; Energy Savings; Turn On Your Phone - Cisco 8811 User Manual

Your Phone
Procedure
Select Delay to postpone a phone upgrade.

View the Progress of a Phone Firmware Upgrade

During a phone firmware upgrade, you can view the upgrade progress.
Procedure
Step 1
Press Applications
Step 2
Select Phone information > Show detail.
Step 3
Press Exit.

Energy Savings

Your administrator can reduce the amount of power your phone screen uses when you're not using your phone.
Your administrator can set up these energy-saving levels on your phone:
• Power Save—The backlight or screen turns off when the phone is inactive for a set interval.
• Power Save Plus—Your phone screen turns on and off at times that are based on your work schedule.
For example, your administrator can set your phone to alert you 10 minutes before it turns off. You see the
Select button light up and you get a message that your phone is turning off soon. You get notifications at these
intervals:
• Four rings at 10 minutes before power off
• Four rings at 7 minutes before power off
• Four rings at 4 minutes before power off
• 15 rings at 30 seconds before power off
If your phone is active, it waits until it has been inactive for a set interval before it notifies you of the pending
power shutdown.

Turn On Your Phone

When your phone turns off to save energy, the phone screen is blank and the Select button lights up.
.
If your work hours or work days change, you can contact your administrator to reconfigure your phone.
View the Progress of a Phone Firmware Upgrade
Cisco IP Phone 8800 Series User Guide
31