Usb Headsets; Connect A Usb Headset; Bluetooth Headsets - Cisco 8811 User Manual

USB Headsets

Procedure
Step 1
Press Applications
Step 2
Select Accessories > Analog headset > Setup.
Step 3
Press On or Off to enable or disable wideband for the analog headset.
Step 4
Press Return .
USB Headsets
You can use a USB headset for your calls if your phone has a USB port.
For a list of supported headsets, see
that are not listed may not function properly if you attach them to the USB port. For more information, see
the documentation from your USB headset manufacturer.

Connect a USB Headset

When you use USB headsets with your phone, keep in mind:
• You can use only one headset at a time. The most-recently connected headset is the active headset.
• If you are on an active call and unplug a USB headset, the audio path does not change automatically.
Procedure
Plug the USB headset plug into the USB port on the phone.

Bluetooth Headsets

You can use a Bluetooth headset for your calls if your phone supports Bluetooth.
When you use Bluetooth headsets with your phone, keep in mind:
• If you have both a Bluetooth headset and a standard headset attached to the phone, only one type of
• If you use a USB headset, both the Bluetooth and analog headset are disabled. If you unplug the USB
• For optimum headset coverage, use your Bluetooth headset within 10 feet (3 meters) of the phone.
• Your phone supports the Bluetooth Handsfree Profile. If your Bluetooth headset supports these features,
Cisco IP Phone 8800 Series User Guide
102
.
You need to press the Speakerphone button or pick up the handset.
headset works at any time. When you enable one headset, the other is automatically disabled.
headset, you need to enable the Bluetooth or standard headset.
you can use your headset to:
◦ Answer a call
◦ End a call
Unified Communications Endpoint and Client
Accessories
Accessories. USB headsets