Conference Calls And Meetings; Add Another Person To A Call; Swap Between Calls Before You Complete A Conference - Cisco 8811 User Manual

Conference Calls and Meetings

Procedure
Step 1
From a call that is not on hold, press Transfer
Step 2
Enter the other person's phone number.
Step 3
(Optional) Wait until you hear the line ring or until the other person answers the call.
Step 4
Press Transfer again.

Conference Calls and Meetings

You can talk with several people in a single call. You can dial another person and add them to the call. If you
have multiple phone lines, you can join two calls across two lines.
When you add more than one person to a conference call, wait a few seconds between adding participants.
As the conference host, you can remove individual participants from the conference. The conference ends
when all participants hang up.

Add Another Person to a Call

When you add more than one person to a call, wait a few seconds between adding participants.
Procedure
Step 1
From an active call, press Conference
Step 2
Add the other person to the call by doing one of the following:
• Press Active calls and select a held call.
• Enter the phone number and press Call.
Step 3
Press Conference.

Swap Between Calls Before You Complete a Conference

You can talk to a person before you add them to a conference. You can also swap between the conference
call and the call with the other person.
Procedure
Step 1
Call a new conference participant, but do not add the participant to the conference.
Cisco IP Phone 8800 Series User Guide
54
.
.
Calls