View And Remove Conference Participants; Scheduled Conference Calls (Meet Me); Host A Meet-Me Conference; Join A Meet-Me Conference - Cisco 8811 User Manual

8800 series
Hide thumbs Also See for 8811:
Table of Contents

Advertisement

Calls
Wait until the call is connected.
Step 2
Press Swap to toggle between the participant and the conference.

View and Remove Conference Participants

If you create a conference, you can view the details of the last 16 participants who join the conference. You
can also remove participants.
Procedure
Step 1
While you are in a conference, press Show Details to view a list of participants.
Step 2
(Optional) Highlight a participant and press Remove to drop the participant from the conference.

Scheduled Conference Calls (Meet Me)

You can host or join a conference call at a scheduled time.
The conference call does not start until the host dials in, and it ends when all participants hang up. The
conference does not automatically end when the host hangs up.

Host a Meet-Me Conference

Before You Begin
Get a meet-me phone number from your administrator, and distribute the number to the conference participants.
Procedure
Step 1
Lift the handset to get a dial tone and press Meet Me.
Step 2
Dial the meet-me phone number.

Join a Meet-Me Conference

You cannot join a meet-me conference until the conference hosts dials in. If you hear a busy tone, the host
has not dialed into the conference. Hang up and try your call again.
Procedure
Dial the meet-me phone number that the conference host provides.
View and Remove Conference Participants
Cisco IP Phone 8800 Series User Guide
55

Advertisement

Table of Contents
loading

This manual is also suitable for:

88418851nr8845886188658865nr ... Show all

Table of Contents